Showing posts with label home. Show all posts
Showing posts with label home. Show all posts

Friday, March 13, 2015

Good Idea Friday - Plywood Floors



We've spent the past year overhauling our attic into a bedroom. Our house, built in 1909, has amazing hardwood floors in most rooms and we were trying to figure out how we could install new flooring--on a budget--that wouldn't clash too terribly with the original flooring. After spending countless searches on pinterest trying to come up with a solution within our budget, I came across this blog post from the infamous Centsational Girl about plywood floors.

Now, I was skeptical. Really skeptical. But after crunching the numbers we realized with $80 worth of plywood, we could install flooring not just in the new bedroom, but also in the hallway leading out to the upstairs landing, So we decided to give it a try. If it didn't work out we weren't out that much money, and hey, nothing a couple area rugs couldn't cover right?

We went about it slightly different that the above post, we had the hardware store cut the wood for us, in the same width as our hardwood floors, and in various lengths. Stores generally charge for this, but for us this was still better than trying to use our extremely old and fairly scary table saw.

First to go down was the sub floor chipboard, screwed to the floor joists, then plastic foam sheeting designed to go under flooring. We laid out the planks, lined them up to our liking, and nailed them down using a brad nailer. Once in position, we used dark caulk to fill in any gaps. This is a great trick, by the way, for hard wood floors; plaster, putty, and glue-sawdust mixture tends to dry and can crack apart and/or pop out over time. Silicone caulk on the other hand, does not. You can find it in various different colors too, so get one that matches the stain you plan to use. (I got the idea from a great friend who also blogs about home remodeling and projects - Us Versus The House) 

After the caulk set we sanded, gently. Plywood is thin sheets of wood glued together, sand too hard or deeply and it gets funky looking, as some colored inner layers will start to show. Just be careful when sanding. We then applied 3 coats of a dark brown stain (Jacobean by Minwax), the same we used on the original floors, and then finished the whole floors with 3 coats of water based polyurethane.

And the final product! 


There's a few things we would have done differently with our flooring though: don't skimp on the wood. We went with a thinner (cheaper) 1/4" plywood, where as the original blog post suggests 1/2", and though it was fine for the room it's in, in a much higher traffic area we would really recommend going with thicker plywood. It LOOKS great, and nearly matches the original wood floors for us, but the sound is off. I know that sounds silly, but it actually sounds more like a laminate flooring instead of actual wood.

All in all I'm extremely pleased with the floors, and for the price (roughly $160 for all the supplies), you really couldn't get a cheaper flooring option than this. This might SOUND like a large undertaking, and something out of the reach of most people, but it really was one of the easiest projects I've done. To summarize, you basically get plywood, cut into planks, lay down subfloor and subfloor sheets, nail planks down. sand, stain, poly. Done. Something like this could easily be done in a week or less (have to let that stain and polyurethane dry!) and is a great floor option for anyone looking for something new on a tight budget. 

Oh, and because I just can't NOT post before and after photos of the attic turned bedroom, here you go if your curious. It was originally lined with wood planks and covered with newspaper from 1918. We KNOW wood plank rooms are en vogue on pinterest, but if you saw the amount of dust and heaven knows what else that fell along with the planks.. you wouldn't want that in your bedroom. Ever.


Before Remodel


After Remodel




Wednesday, February 25, 2015

Cleaning Your Oven with Ammonia

"Easy Oven Cleaning Tip! No more harsh chemicals to clean your oven! Just use ammonia"



 Before I start, just to get this out of the way. YES, it does work. That's not what makes this a bad idea though. Ammonia is a household item that, as the decades pass, become rarely seen in most peoples houses. There's a very good reason for that actually. You see, as much as people assume a single ingredient cleaner is less harsh or scary than those modern cleaners that have a mile long ingredient list, that's not always the case. In fact, cleaning your oven with ammonia can be far more dangerous and harmful than the infamous spray-on oven cleaner most of us know.

 Let's look at this commonly touted pin/life hack.
  1. Preheat to 200° then turn off. 
  2. In a heat safe glass dish, fill with ammonia and set on middle rack (about 1 to 2 cups of ammonia). 
  3. In another dish, fill with boiling water and set on bottom rack (2 cups). 
  4. Leave overnight. 
  5. The next morning, remove dishes and wipe down the inside with a hot wet sponge


There's a few problems right off the bat with this: there's no mention whatsoever of using gloves or proper ventilation. Ammonia is highly caustic and toxic and can be extremely harmful to your skin, eyes and lungs. In fact a woman in Denmark was sent into a coma from cleaning her oven this way. Which brings up another fact to keep in mind - ammonia is sold in varying strengths, from 2% to 10%, in different countries. This little life hack is meant to be used with the weaker variants found in countries like the US. When you heat up ammonia it stands a good chance of vaporizing, which is extremely dangerous. Vaporized ammonia not only can burn your eyes and lungs, it can kill you if you inhale enough (by, say, sticking your head in an oven trying to clean it).

The fact is, ammonia really isn't better for you or the environment from other forms of oven cleaners. You might look at the ingredients of such products as Easy Off and balk at what it contains, but when you read over just how bad ammonia actually is, you quickly realize that one isn't better than the other. In fact, modern day oven cleaners tend to have far fewer--if any--fumes, something ammonia surely can't claim. Not only that, if you use various other cleaners in your house, you have to be extremely careful to never EVER mix ammonia with anything that contains bleach. That can cause a reaction that produces fumes that can quite literally kill you.

In my opinion, there's a very good reason many housewives started ditching such cleaners like ammonia in favor of the modern cleaners that started appearing in the mid century and soon took over our homes. All in all, this is just not a good idea. There are many other, safer ways to clean your oven.

Friday, May 02, 2014

Good Idea Friday - Glue and Food Coloring to Make Colored Beach Glass


A fan sent me this and was wondering just how do-able it was. I've seen this around pinterest like many of you I'm sure, but I was pretty skeptical about how well it would work. 

I did a sneak peak awhile back on our facebook page and needless to say, since this is a Good Idea Friday post, it worked! 

I had a small glass candlestick holder I picked up at the dollar store to test this out on. Mixing just your basic kids glue with a drop or two of food coloring (a little bit goes a LONG way! I wanted a more softer realistic color to the glass, so less was more) and I painted it on.



Looking at it, I was still really skeptical. It looked streaked, thicker in some places, and blotchy. 


But checking back on it once it dried.. yep. turned out perfectly! 


Now a few things, this is just basic glue. Water, grease, dirt, even your nails, will damage the coating. In fact you can just peel the glue off or wash it in warm soapy water to get the glue/dye mixture off. But if you're looking for a temporary way of dressing up a table or mantle this would be fine. As far as the source, it looks like it belongs to a private G+ account that had this image shared publicly, so I won't link to that. 

Have any pins you're wondering about? Let us know! Find us on Facebook and Twitter.

Monday, July 01, 2013

Landry Basket to Make Polka Dot Walls


"polka dot walls! Make a stencil from an old laundry basket" 


Today's post is what I wouldn't call a bad idea, but that's just not what this is an image of. I too was tricked by this post as first, it's been making the rounds of pinterest for sometime now. But I got to thinking ... laundry baskets are made of fairly thick plastic, which would make for a pretty bad stencil. Anyone who has ever worked with stencils knows that the thinner the plastic, the better. It helps keep the stencil flush with the wall and prevents paint from dripping or leaving the boundaries of the stencil. A quick search later and I realized why that didn't seem right with me: it's not a stencil made from an old laundry basket at all. 

Over at The Lil House That Could, you'll find the original source of the image. It's not a laundry basket, just a traditionally made stencil. 

Polka Dot Closet : The Lil House That Could 

I'm all for turning everyday items into something else (the cut bottoms of celery make the prettiest rose pattern for stampings!) but when it comes to stencil work, thinner is better, so I'd set the laundry basket down and just use a traditional stencil.  



Wednesday, June 26, 2013

Shattered Mirror Floor

"Broken glass floor - great for a bathroom floor or countertop. Just lay broken mirrors on the floor and top with polyurethane" 


I don't even know where to start with this one. That's not what this is an image of. The image quality makes me believe it came from a magazine of sorts, but I'm having a hard time finding the source. My first thought when seeing this image is that it was an artsy spread of some sort in a magazine, not some great DIY home design project.

I'd like to point out there is no sealant or polyurethane in that photo, it's just broken mirrors. Also, as someone who has done a lot of refinishing including the floors of my house, polyurethane is an extremely thin sealant - I think what the creator was the pin was thinking more of would be an epoxy resin, which on the floors wouldn't work easily, takes days to set up, and bubbles like crazy unless it's set just so or with a heat source. 

So yeah, this isn't even doable if you ask me, at least not as a DIY home project. 

Friday, May 17, 2013

Good Idea Friday - Aluminum Foil Dryer Sheets


I know, I know. If it was that easy why isn't everyone using aluminum foil instead of wasting money on dryer sheets? But it is. In fact there is science behind it. It's as simple as taking some aluminum foil, roughly crumpling it into a ball, and adding a few of those to your dryer. It won't give your clothes that scent that dryer sheets do, but it DOES cut a lot of the static away from your clothes, which is at least the #1 reason I use dryer sheets. But how does it work? Easy - it all comes down to ions. 

You see, what causes static electricity in the first place is run away ions. You can read more here on a quick and simple rundown on what causes static electricity if you're interested. My theory is that as aluminum is a pretty good conductor that it simply discharges any of the static in your dryer, instead of allowing it to build up on the clothing. Another alternative you see mentioned online is wool dryer balls or tennis balls, but those don't work on static, only on speeding up drying time and making clothes fluffy. 

So has anyone tried this? Since I take my clothes to the laundromat I've been a bit hesitant to personally try it, but I'd love feedback on if you think it works well or not. Leave a comment here or over on our facebook page. 

Friday, March 22, 2013

Good Idea Friday - Refilling your Wallflowers

"Do it yourself refills for any plug-in air freshener. Less expensive and better for your health!"


This idea was submitted to me by at least three different people last week, so it's clearly a hot item over at Pinterest at the moment. But is it a good idea? Bad idea? Honestly - it's a little of both. Not bad enough to put as a bad idea, but flawed enough it's not the best of ideas. Here's why. 

Wallflowers - the ever popular home scent item from Bath and Body Works, are heavy in things like VOC and chemically made scents. Anyone wanting a more natural home will understand why plugging something like that into your outlets to scent the home isn't really all that good. But what about a more natural alternative? As the pin states just use natural oils! 

My first thought when I saw this was that it was fairly sound - simply replacing the artificial scents with natural oils would work. But after spending a bit of time researching I'm not so sure anymore. Over at My Daily Bread, she brings up a lot of good points - mainly that what makes natural oils so nice is also why they aren't commonly used in items like this. Exposure to high heat, air and light will cause the oils to break down. Not to mention the sheer COST that it would take to refill these - essential oils are very costly depending on the scent you're going for. I've seen on other blogs where they recommend mixing it with various other oils and alcohol, but that starts to get in possibly dangerous territory since this is eventually being heated by an outlet, and could pose a fire risk. Different oils have different heat rates at which they can combust, so unless you know the oil you're using is safe to use in this manner it's probably best not to. I'd imagine a light scented oil with a high smoke point would be the safest as they handle heat the best, something like canola (475°F) or safflower oil (510°F) tend to have a high smoke point and are easily accessible.

But that all aside - does this work? Yes, I believe it would. I don't have those in my house to personally test out, but I've read enough blogs and articles about it to make me think this would work. The downside being of course is it's far more costly and not going to be as powerful scented as the artificial ones. 

So what can you do if you want a more natural way to scent your house without having to spend $15 every time you need to refill one plug in? Easy. Long ago, before they had even came up with plug ins, it was fairly common for people to have metal or ceramic rings that they would set on a lamp's light bulb and then fill with oils. Once heated by the lamp, the scent would be released. Why is this better? Because you're only using a small amount of oil at a time, so it doesn't have time to fade or go rancid, and comes with a far lower chance of fire. You can also change the scents easily on a whim. The rings are sold at a lot of different places and tend to run about $5 a piece, so it's also cheaper than the whole wallflower set up is. 

So what do you think? Good idea or bad idea? Any of our fans going to try this for us and report back?  

Monday, February 18, 2013

Jello Legos

"Wash mega blocks, fill them with jello, and chill. You will have lego jello!" 


Hey look! It's a picture of Jello, in the shape of Legos! What makes people assume that it's as simple as just filling empty legos with jello I will never understand. I have kids - kids have Legos. I've played with them before and took a look at the underside of the blocks - they don't look like just an inverted Lego.

But the pin says Mega Blocks, which we don't have. A quick google search though shows the same thing on the underside of the blocks. There is no way you can just pour Jello in there and get a lego shape. Not to mention the blocks are so ridged that it would be really difficult to get the Jello out once it's set up. 

So how DO you get Lego shaped Jello shown in the pin? With a silicone mold of course! You can order one here at amazon . Those are made by Lego it appears, but there are several other companies that make them as well. And because Pinterest is all about DIYing, here's a great blog write up on how to make your own silicone mold if you're feeling fancy. 


Crafty Corner : DIY Lego Mold


Friday, January 25, 2013

Good Idea Friday - Peroxide and Washing Soda



I'm usually skeptical when it comes to all the "make it yourself!" cleaners on pinterest. Yes baking soda and dawn works to clean your tub, but not nearly as well as the spray and wipe power of modern chemical cleaners (at least in my opinion - it takes a lot more elbow grease to clean the old cast iron clawfoot tub I have compared to the more modern fiberglass tubs and showers most people have) But this is one of the good ones on pinterest - in fact, this is what Oxyclean is. It's technically what is  referred to as oxygen bleach and it's just a mix of washing soda and hydrogen peroxide. (source: wikipedia) 

I haven't made this myself yet, but the recipe is as follows :

Homemade Oxy Clean 
1 cup water 
1/2 cup hydrogen peroxide
1/2 cup washing soda

Mix all ingredients together and store in a dark spray bottle. Hydrogen peroxide loses its effectiveness if stored in a light container. 

To use: Spray on soiled laundry and let it sit overnight. Or, if you have a number of clothes that are soiled, you make up a batch of this and soak them


Has anyone made this? how did it compare to things like Oxyclean? 

Friday, January 18, 2013

Unstoppable Bad Idea

This is one of those ideas that just had me confused as to who honestly thought it was OK, and more so that it seems a LOT of people don't question the safety of this.



What's that you ask? It's The new laundry product by Downy, called Unstopables, in an oil burner. Apparently if you do this, your house will have a 'just done fresh laundry' scent all day long. I've seen this all over Pinterest, and tried to find the blog that this image originated from but couldn't. I did however find a lot of people complaining that it didn't work, and just ended up smelling badly burnt.

Let's back up here. People are taking laundry products, and melting them. With out a care or thought in the world about what is IN this product. I'll give you a hint - it's not just lovely magical scent beads that are perfectly fine to melt. I can tell you right now this isn't a good idea. There is a big difference between adding something to your wash, and melting it and breathing in those heavenly scented fumes. But just to play it safe on my report, I emailed P&G directly about this. I have a feeling the woman who replied thought I had lost my ever loving mind, and gave me your pretty basic reply: 

Thanks for contacting Downy

Safety is our top priority and all our products are thoroughly evaluated to be safe when used properly. We cannot recommend using a product for a different purpose or in any way other than as explained in the instructions on the label.
Thanks again for writing
Megan - Downy Team


So there you go, direct from P&G, you really shouldn't be using something used in your wash in an oil burner. And because I'm curious enough, I looked up the actual safety data on Unstopables. Which is just full of interesting information. Not only do they recommend NOT using water if this stuff catches fire, they also directly say to avoid excessive heat and open flames. I haven't bothered to look up the ingredients to see how it could affect you if you inhale them, but I can take a guess and imagine it's probably not the best thing. (you can read the write up here (PDF) if you're interested)