Good Idea Friday - Plywood Floors

We've spent the past year overhauling our attic into a bedroom. Our house, built in 1909, has amazing hardwood floors in most rooms and we were trying to figure out how we could install new flooring--on a budget--that wouldn't clash too terribly with the original flooring. After spending countless searches on pinterest trying to come up with a solution within our budget, I came across this blog post from the infamous Centsational Girl about plywood floors.

Now, I was skeptical. Really skeptical. But after crunching the numbers we realized with $80 worth of plywood, we could install flooring not just in the new bedroom, but also in the hallway leading out to the upstairs landing, So we decided to give it a try. If it didn't work out we weren't out that much money, and hey, nothing a couple area rugs couldn't cover right?

We went about it slightly different that the above post, we had the hardware store cut the wood for us, in the same width as our hardwood floors, and in various lengths. Stores generally charge for this, but for us this was still better than trying to use our extremely old and fairly scary table saw.

First to go down was the sub floor chipboard, screwed to the floor joists, then plastic foam sheeting designed to go under flooring. We laid out the planks, lined them up to our liking, and nailed them down using a brad nailer. Once in position, we used dark caulk to fill in any gaps. This is a great trick, by the way, for hard wood floors; plaster, putty, and glue-sawdust mixture tends to dry and can crack apart and/or pop out over time. Silicone caulk on the other hand, does not. You can find it in various different colors too, so get one that matches the stain you plan to use. (I got the idea from a great friend who also blogs about home remodeling and projects - Us Versus The House) 

After the caulk set we sanded, gently. Plywood is thin sheets of wood glued together, sand too hard or deeply and it gets funky looking, as some colored inner layers will start to show. Just be careful when sanding. We then applied 3 coats of a dark brown stain (Jacobean by Minwax), the same we used on the original floors, and then finished the whole floors with 3 coats of water based polyurethane.

And the final product! 

There's a few things we would have done differently with our flooring though: don't skimp on the wood. We went with a thinner (cheaper) 1/4" plywood, where as the original blog post suggests 1/2", and though it was fine for the room it's in, in a much higher traffic area we would really recommend going with thicker plywood. It LOOKS great, and nearly matches the original wood floors for us, but the sound is off. I know that sounds silly, but it actually sounds more like a laminate flooring instead of actual wood.

All in all I'm extremely pleased with the floors, and for the price (roughly $160 for all the supplies), you really couldn't get a cheaper flooring option than this. This might SOUND like a large undertaking, and something out of the reach of most people, but it really was one of the easiest projects I've done. To summarize, you basically get plywood, cut into planks, lay down subfloor and subfloor sheets, nail planks down. sand, stain, poly. Done. Something like this could easily be done in a week or less (have to let that stain and polyurethane dry!) and is a great floor option for anyone looking for something new on a tight budget. 

Oh, and because I just can't NOT post before and after photos of the attic turned bedroom, here you go if your curious. It was originally lined with wood planks and covered with newspaper from 1918. We KNOW wood plank rooms are en vogue on pinterest, but if you saw the amount of dust and heaven knows what else that fell along with the planks.. you wouldn't want that in your bedroom. Ever.

Before Remodel

After Remodel

Space Age Power

"Node Electric Outlet eliminates the need for a power strip. Just plug it in anywhere on the square!" 

Oh how I fell in love the first time I saw this pin. Aesthetically something like this just screams "Space Age!" to me, like the future is finally here. The only thing missing is a slight blue glow where you add the plugs to help hint that I might be one step closer to a flying car. I imagine Rosie from The Jetson's would use something like this to recharge her batteries.

But logic kicked in, and I knew that this was one of those "too good to be true" pins. I often times come across pins that I know are conceptional designs being pinned as if they are real. I had a feeling this was one of those, so I went on a bit of a hunt to find out more information on this outlet. 

It's from a company in Japan called Metaphys. It's doesn't appear to be available for sale on their site. In fact it's titled as "Proposed Outlet". In my search I read somewhere that they are working hard on making this a very real thing, but unfortunately the wiring and electric codes, at least here in the U.S., are strict enough that something like this just wouldn't be up to code as it is currently. 

Not only would something like this make it easier for Jr to jam a butter knife.. and fork.. and probably half the silverware drawer into the outlet, there is no grounding on this. It also begs the question of just how MUCH you can plug into this - it looks like with standards plugs you could probably jam pack this outlet with up to 16 plugs, which I'm pretty sure is asking for a fuse to blown in the best of situations. Not only that, but you'd never want to use something like this in place of a power strip - power strips often times are designed to work as surge protectors, so in case of a power surge your electronics don't get fried. This wouldn't be able to do that, and if fact with out grounding you run a higher risk of damaging whatever is plugged into it. 

So for now, no. It's not really a real thing YET, and even if it was, unless it was designed better with grounding options and better safeguards I don't see it being available at least in the U.S. any time soon.