Showing posts with label auto. Show all posts
Showing posts with label auto. Show all posts

Monday, May 05, 2014

Salt and Vinegar to Remove Rust

"Solution for rusty tools. Soak overnight in vinegar and salt for good as new!"


I have a problem with moisture in my studio, which means if my tools don't get put away properly, rust happens. I found a cache of bits and burs I had left in a jar tucked away on my bench, and they were a mess of rust. I realized this would give me a great chance of testing out a pin I found awhile back, suggesting that vinegar could easily remove rust. 


Having used up all of my white vinegar for egg dying, however (I mean really, what else were we going to do with dozens of eggs after our test of popular hard boiling methods?), I did have some apple cider vinegar on hand, and it has the same acidity level as white vinegar (5%) so I figured I'd go ahead and test this out. I bought a commercial rust remover just in case and decided to test them out side by side to see which comes out the winner. I was honestly a bit nervous about testing this out since these aren't cheap burs, and I know salt water is just about the worst thing you could introduce to your tools. 



They both smelled pretty bad honestly and my kids were complaining, so I had to keep them stored overnight in my studio. After 24 hours I checked on the bits to see how they were doing.. The commercial rust remover in the forefront there, was looking pretty murky and dark. The vinegar salt combo in the back, on the other hand, just looked dingy and oddly foamy. 


I washed them with a bit of dish soap and then patted dry with a paper towel.



Can you guess which is which? 


The burs with rust still on them were the ones who got the vinegar salt bath, the blackened, yet rust free, burs are the ones who got the chemical bath. 

Now I've since seen a few youtube videos on this, and it seems that yes, it does work, to a degree at least. You have to admit the bits do look less rusty compared to the before photo, but they aren't rust free. The videos recommend scrubbing the rusted item with a coarse bristle brush. However these bits are tiny. Something like this might be worth a shot on random tools you pick up at a yard sale, but when faced with delicate costly work tools (or burs and bits in this case) I'm going to reach for the chemical bath. Not only that, but scrubbing alone will remove the rust. So the vinegar might loosen the rust, but you still have to scrub - if that's the case, you might as well soak it in anything and go to town with a steel wool pad.

Though really, I'll work better at putting my tools away, so I hopefully won't have to test this out again any time soon.

Monday, February 11, 2013

Miracle Vinegar Ice Melt


"Saving this idea for the Cold Days ahead! Hate scraping off ice! Ice Proofing the Car Windows with 2/3 Vinegar 1/3 water! Just spray on windows and ice will melt away! Totally making a bottle of this for this winter!" 


This was a request from a friend, who wanted to know how true this pin was. Because honestly who doesn't hate having to take an extra 30 minutes in the winter to shovel your way out, scrape ice, warm up your car. Ick. That's an extra 30 minutes I could have spent in my nice warm bed.  

I was hoping to be able to test this out myself before posting about it, but here in the Pac Northwest we seem to be keeping a steady 40 degrees and rain, so I haven't been able to test it out. However due to science and numbers, I can say this is most likely false. 

Why? Well first off, the pin states "spray your windows and watch the ice melt away!" I've also seen the same idea that says if you put it on your windows before it snows or becomes icy it will prevent ice from building up on the windows. But vinegar (one of the biggest go to miracle items of pinterest - its up there with magic erasers and coconut oil go to Cure Alls) has a freezing point of 28°F. That is only a few degrees lower than water. So if you're outside and it's 31°F and you happen to keep this vinegar mix inside meaning it's room temperature this MIGHT work. It's not going to cause the ice to just melt away though. And if you apply it before night to prevent ice, you're going to wake up to a smelly frozen vinegar water snow ice mix you get to scrape off. On the other hand, the freezing point of  sodium chloride (aka: Salt) is around -6°F, you stand a better chance at getting results with salt water than you do vinegar. 

Now I'm not a car person, but a few forum posts about this also brought up the issue vinegar is an acid by nature, so too much vinegar on your car's metal or chrome trim and detailing might just damage it. 

All in all, this one is a bad idea. Not to mention a time waster, since you're still going to have to scrap that ice once the vinegar failed to melt the ice away. Alcohol based DIY deicers might work better as would windshield fluid designed for winter use. 

But what CAN you do to help cut back time in the morning scraping ice? An amazingly simple item you probably have in your home can in fact prevent snow and ice from clogging up your windshield. Cardboard. Simply cover your windshield with cardboard, holding it in place with the wipers  If that's a little too unsightly for you, you can also buy covers made just for this purpose.